Figure 212 – Static Routing Settings
To create a new static route please click Add New Route and select the related interface
(Ethernet/wireless), specify destination, netmask and gateway IP, and metric values. Click the Save
Route to add new static route in the Routing table.
Figure 223 -- Add Static Route
Destination, Netmask and Gateway are required parameters to specify.
DHCP Settings
The DHCP server settings specify, which IP addresses are assigned to the DHCP clients in the LAN.
For a P-380 in AP router mode, these are the mobile wireless stations or P-380 devices in client
router mode with DHCP client function enabled.
Gemtek Systems
Page 31