X16 Installation Guide
Idle LCD Display
07:19P 10/12 FRI
Accounting
312
Time, Date, Day, Name and Number
07:19P 10/12 FRI
NEW VMSG:04
312
4 New Voice Mail Messages
07:19P 10/12 FRI
TRK2TRK FWD
312
Trunk to Trunk Forwarding
- 60 -
07:19P 10/12 FRI
Accounting
DND
In DND Mode
07:19P 10/12 FRI
New CID:24
312
24 New Caller ID Calls
07:19P 10/12 FRI
External FWD 312
External Forwarding
Issue 2
Installation
Step 1 - Location
The X16 system should be located close to the telephone company
interface (RJ21X), and have a dedicated outlet with an isolated ground.
The system can be mounted on the wall or placed on a table. Once the
location of the system is determined use the supplied "System Wall
Mount Template" to level and the provided screws to secure the system
to the wall or place it on a table.
Do not tighten the screws all the way, leave about ¼ of an inch which
will be used to lineup the "snowmen" on the back of the system. Place
the X16 system over the screws and slide it into place.
Issue 2
- 13 -