Step 2 - Insert The Expansion Module; Telephone Wall Mount - Xblue Networks x16 Installation Manual

X16 Installation Guide
Step 2 – Insert the Expansion Module
Remove the plastic tab found on the front of the Voice server. Insert the RJ14
connections through the front of the voice server and secure the card with the
provided screws. Connect the ribbon cable from the expansion module to the
main board and replace the cover. Place the provided black plastic encasement
window around the newly installed card.

Telephone Wall Mount

When wall mounting an X16 Digital Telephone Endpoint be sure to use
the inner posts (3.26 inches) on an adjustable wall mount plate. If this
plate is not available, use the "Telephone Wall mount" template, which
can be found on the "System Wall Mount Template" used in step 1 (
Page 13) of the installation section.
- 22 -
AUX OGM
Play
Weekend Mode
On/Off
Weekend Start
Fri, 06:00 PM
Weekend End
Mon, 09:00 AM
Weekend OGM
Play/Record
Issue 2 Issue 2
AUX OGM – The Auxiliary Outgoing Message,
is accessed when the caller dials "7" while in
the Auto Attendant. At default this is
intended to be used to record the company
directory. However, it can be used as an
announcement only "mailbox" for commonly
asked questions such as hours of operation
or directions to the office.
Weekend Mode – When set to On, the
system will play a special weekend OGM. If
set to Off, the system will follow the standard
day and night schedule.
Weekend Start – This is the time that the
system will begin playing the recorded
weekend outgoing greeting.
Weekend End – This is the time that the
system will stop playing the recorded
weekend outgoing greeting.
Weekend OGM – The greeting that will play
during the weekend mode. If this greeting is
not recorded and Weekend Mode is set to
On, the system will play the default system
night greeting.
- 51 -