Co Line Expansion Module; Step 1 - Installing The Expansion Module - Xblue Networks x16 Installation Manual

X16 Installation Guide
Holiday Mode – When set to On, the system
Weekend Mode
will play a special holiday OGM. If set to Off,
On/Off
the system will follow the standard day/night
or weekend schedule.
Holiday Start – This is the time that the
Weekend Start
system will begin playing the recorded
Fri, 06:00 PM
Holiday outgoing greeting.
Holiday End – This is the time that the
Weekend End
system will stop playing the recorded Holiday
Mon, 09:00 AM
outgoing greeting.
Holiday OGM – This is the greeting that will
Weekend OGM
play during the Holiday mode. If this greeting
Play/Record
is not recorded and Holiday Mode is set to
On, the system will play the default system
night greeting.
- 52 -

2 CO Line Expansion Module

The X16 system comes with four CO Lines, and can be expanded to six CO
Lines, when the 2 CO Line expansion module is installed.
The expansion module is located inside the communication server and connects
to the main board, via ribbon cable. After it is installed, and the system is
powered on, the expansion module will be recognized in software and become
fully operational. Use the following steps to install the expansion module.
Step 1 – Installing the Expansion Module
Place the voice server face down on a stable surface such as a table, showing
the four rubber feet.
Rubber Feet
Remove the four rubber feet, placing them in a safe place, such as the back of
the voice server, exposing 4 screws. Unscrew the four screws and remove the
cover.
Issue 2 Issue 2
2 CO Line Expansion Module
Philips Head Screws
- 21 -