Beeper; Record Mode - Launch CRP123 User Manual

LAUNCH
Choose [Unit of Measure] and press [
unit setting interface. Use the [
and press [ ] to save your change.

6.3 Beeper

It is used to set On/Off the buzzer.
Choose [Beeper] and press [
[ ] to switch between on and off.

6.4 Record Mode

It is used to turn On/Off recording function.
26
Creader Professional CRP123 User's Manual
] to confirm, the screen will enter the
]/[ ] button to choose the desired one
Figure 6-3
] to confirm, the screen enters Fig. 6-4. Press
Figure 6-4