Launch CRP123 User Manual page 21

LAUNCH
Press [ ] to enter to select the manufacturer. Figure 5-7 will be shown on the
screen. Press [
or previous page. After selecting the desired one, and then press [
If some DTCs are found, the system will enter a screen similar to figure 5-8 will
appear:
1/14 indicates there are 14 codes total and now P0001 is the first code to
12
Creader Professional CRP123 User's Manual
Figure 5-6
]/[ ] to select different items; press [ ]/[ ] to turn to next
Figure 5-7
Figure 5-8
] to confirm.