Launch CRP123 User Manual page 18

LAUNCH
4. Turn the ignition on. Engine can be off or running.
5. After finishing, the system will start initializing. After initialization, the system
will enter the main menu interface. See Figure 4-2 & Figure 4-3.
Figure 4-2
CAUTION: Don't connect or disconnect any test equipment with ignition on or
engine running.
Creader Professional CRP123 User's Manual
Plug one end of the diagnostic
cable to diagnostic interface,
then connect the other end to
vehicle's DLC.
Figure 4-1
Figure 4-3
9