View Freeze Frame - Launch CRP123 User Manual

Creader professional
Table of Contents

Advertisement

LAUNCH
Press [
] to return to Diagnostic Menu.
Select [Select Items] in Datastream menu and press [
the interface as shown below:
Press [
]/[
] button to select datastream items, and press [ ]/[ ] button
to turn page.
After selecting items, press [
items.
To select all datastream of the current page, highlight the first line and then press
[
],  will appear before all items. To deselect all, just press [
Press [
] to return to Diagnostic Menu.
If [View Graphic Items] is selected in Datastream menu and press [
the graphic items selection screen.
Press [
]/[
] button to select single data stream items, and press [
button, the screen will display the selected items of live graphic data.
Press [
] to return to Diagnostic Menu.

5.1.5 View Freeze Frame

When an emission-related fault occurs, certain vehicle conditions are recorded
by the on-board computer. This information is referred to as freeze frame data.
Freeze Data is a snapshot of the operating conditions at the time of an emission-
related fault.
Note: if DTCs were erased, Freeze Data may not be stored in vehicle memory
depending on vehicle.
Creader Professional CRP123 User's Manual
Figure 5-19
], the screen will display the selected datastream
], the screen will display
] again.
] to enter
]
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents