Danfoss FCM305 56 Instruction Manual page 44

Infinitely variable change of numeric data value
If the chosen parameter represents a numeric data
value, the position (tens, tenths, hundreds, etc.) is
chosen by scrolling with the [<] or [>] keys.
FREQUENCY
60.0 HZ
130 START FREQUENCY
09.0 HZ
Pressing [<] or [>] keys changes the digit (0-9) of
the selected position:
FREQUENCY
60.0 HZ
130 START
10.0 HZ
The digit in the position being altered with flash,
th
when the 4 Line reads the desired value to be
saved, press [OK] once.
7-10
FCM 300 Series
SETUP
1
SETUP
1
MG.03.B6.2G - VLT is a registered Danfoss trademark