Danfoss FCM305 56 Instruction Manual page 21

Danfoss PC software for serial communication
All FCM 300 Series units come standard with an RS
485 port to communicate with a PC using Danofss
®
VLT Dialog Software (see page 7-3).
Ordering numbers, VLT
VLT ® Software Dialog
Incl Basic, Logging, Template, Guided tour modules in 6
languages (Danish, English, German, Italian, Spanish and
French)
Accessories for the FC motor
A Local Operation Pad (LOP) for local set point and
start/stop is available for the FC motor. The LOP is
IP 66 enclosed. A Local Control Panel (LCP 2) which
makes up a complete interface for operation,
programming and monitoring of the FC motor is also
available.
Ordering numbers, accessories
Local Operation Pad (LOP)
Local Control Panel (LCP 2)
Remote mounting kit (LCP 2)
Plug kit (LCP 2)
Cable for plug kit (LCP 2)
Cable (direct mounting) (LCP 2)
Service plug kit (LCP 2)
PG 16 to ½" NPT adapter
PG 21 to 3/4" NPT adapter
MG.03.B6.2G - VLT is a registered Danfoss trademark
® Software Dialog
175Z0953
175N0128
175N0131
175N0160
175N0161
175N0162
175N0165
175N0166
176H9207
176H9208
FCM 300 Series
4-5