Replacement Of 512 With 512C; 512C/512 Terminal Differences - Parker 512C Series Technical Manual

R
EPLACEMENT OF

512C/512 Terminal Differences

TERMINAL
T1 Tacho Feedback
T2 Not Connected
T3 Speed Meter Output
T4 Minimum Speed
T5 Run
T6 Current Meter Output
T7 Torque/Current Limit
T8 0V Common
T9 Setpoint Ramp O/P
T10 Aux. Speed Setpoint
T11 0V Common
T12 Total Setpoint O/P
T13 Setpoint Ramp I/P
T14 +10V Reference
T15 Stall Reset.
T16 -10V Reference.
T17 Not Connected. *
T18 Not Connected. *
T19 Health Output
T20 Not Connected*
T21 Not Connected*
T22 Not Connected*
Zero Speed Output /
T23
Zero Setpoint Output
T24 Not Connected*
* Relays must be provided externally.
512C Series Converter
512
512C
Tacho Feedback
Not Connected
Speed Meter Output
Minimum Speed
Run
Current Meter Output
Torque/Current Limit
0V Common
Setpoint Ramp O/P
Aux. Speed Setpoint
0V Common
+12V
Setpoint Ramp I/P
+10V Reference
Stall Reset
-12V
Not Connected
Health Relay. N/C
Health Relay. Co
Health Relay. N/O
Not Connected
Zero Speed Relay. N/C
Zero Speed Relay. Co
Zero Speed Relay. N/O
www.comoso.com

Replacement of 512 with 512C

512C
WITH
512
Active High on 512C
Rescaled to be Normalised to
Setpoint Ramp I/P.
Undesirable to Provide access to
PS Rails.
Total Setpoint Output is a useful
alternative.
Signal Level Revised.
Undesirable to provide access
to PS Rails.
-10V Reference useful
alternative.
Relay removed.
Relay Removed.
Transistor O/P.
Relay removed.
Relay removed.
Relay Removed.
Transistor O/P.
Relay removed.
9-1
COMMENTS