Led Indications - Parker 512C Series Technical Manual

5-1

LED Indications

LED I
NDICATIONS
LED Indications
STALL
POWER ON
512C Series Converter
LED1 STALL TRIP
LED2 POWER ON
LED3 OVERCURRENT
OVERCURRENT
www.comoso.com
Illuminated when controller detects a Stall Condition.
This is determined by the state of the Speed Loop if
Speed control is lost a Stall condition is determined a
Trip will occur after 60 seconds. The motor may not
be stationary.
Illuminated when power supplied to Auxiliary Supply
either directly or via the Auxiliary terminal.
Illuminated when Armature Current exceeds 3½ times
Calibrated Current.