Connecting The Switch To The Network - Aruba JL253A Quick Setup Manual

2. For more information, see Connecting the switch to the network on page 8.

Connecting the switch to the network

1. (Optional) Connect an RJ-45 console cable (not included) and/or a micro-USB console cable (not included) to
a VT-100 terminal or a PC (running suitable terminal emulation software).
2. (Optional) Insert transceivers.
8
The following RJ45 to DB9 console cable can be ordered as an accessory to your switch:
JL448A, Aruba X2C2 RJ45 to DB9 Console Cable
If both cables are connected, input is accepted only from the Micro USB connector. For more
information on connecting a Management Console, see Aruba 2930F Switches Installation and
Getting Started Guide.
Aruba 2930F 24G/48G Switch Quick Setup Guide and Safety/Regulatory Information