Adjusting Camera Settings - Canon BU 45 User Manual

Canon BU 45 Camera Control System User's Manual

Adjusting Camera Settings

Camera setting controls and buttons are displayed on the lower portion of the touch
screen by default whenever the RCP is switched on (Figure 35).
Select the camera control
displayed instead of the camera settings on the lower portion of the touch
screen.
Current settings of the R. Gain, B. Gain, and GL controls are shown as digital readings,
and currently selected White Bal., Gain, Shutter, and N.D. Filter buttons are
highlighted (darkened).
The camera settings are enabled whenever the Manual mode of camera operation is
specified for the selected camera. If the Automatic mode is selected, the camera
settings are disabled (read-only).
A highlighted border is displayed around the R. Gain, B. Gain, or GL controls whenever
they are selected (Figure 35). The corresponding setting can then be adjusted using
either the control on the touch screen or the Selectable knob on the RCP.
Camera Settings
Highlighted
Border
Figure 35 Camera Settings
52
button If the backup RCP controls are