Canon BU 45 User Manual page 32

Canon BU 45 Camera Control System User's Manual
4.
After information for each connected camera has been entered or selected
(see Figure 20 for an example), check the entries to verify the following:
5.
Select the Save button to save the information.
6.
(If needed) Select the cancel
7.
Repeat Steps 1 through 6 for any remaining RCPs, ensuring that identical
line numbers are used and identical information is entered for each camera.
Configured
Cameras
Figure 20 Example of Completed Camera Configuration
30
•
Correct IP addresses and ports are entered for each installed camera
•
BU45H is selected for each installed camera
•
NONE is displayed in the Cam Type field in all unused lines
button to cancel display of the keyboard.