Re- Sending a Scene
If power to a camera is switched off (page 48), the scene settings are not retained in the
camera. used to store the camera settings (see page 52) that have been optimized for
particular lighting. Four scenes can be stored and recalled for each camera.
1.
(If necessary) Select the Scene button with the number that is assigned to the
desired scene for the selected camera to highlight the button.
2.
Select the Re-send button. The camera settings are automatically restored.
Shutdown
Switching the Power Off
The main power switch is located at the rear of the Telemetrics Remote Control Panel
(RCP) (see Figure Figure 11 on page 21).
1.
Place the main power switch in the OFF position.
Power can be switched off at any time.
The power switch can be left on. A screen saver is displayed
whenever the system is inactive for the specified period of time.
Operation
59