Capturing And Recalling Presets; Capturing A Preset - Canon BU 45 User Manual

Capturing and Recalling Presets

Presets are used to store the pan, tilt, zoom, and focus settings for a particular shot.
Sixteen preset shots can be stored and recalled for each camera.
Buttons for saving and recalling a preset shot are located on the RCP and are also
included in the group of backup controls that can be displayed on the touch screen.
If a preset shot is currently selected, the button for the preset shot is illuminated on the
RCP and highlighted on the touch screen (Figure 28).

Capturing a Preset

1.
Select the camera, and adjust the pan, tilt, zoom, and focus for the shot.
2.
Press the ENT SHOT button on the RCP, or select either Save button on the
touch screen.
3.
Press (or select, if using the touch screen backup controls) the Preset
number button that you wish to assign to the shot for the selected camera.
The shot will now be recalled whenever that camera is selected and that
button is pressed (or selected).
Selected Shot
Figure 28 Preset Buttons
Operation
43