Installation and Setup
Locating the Components
The cameras are connected to the Telemetrics Device Server DS-4 by means of serial
cables, and the Device Server is connected to the Remote Control Panel (RCP) by an
Ethernet connection (see Figure 6 and Figure 7 for examples).
Locating the Remote Control Panel (RCP)
The Telemetrics Remote Control Panel (RCP) is linked to the cameras by means of an
Ethernet connection. The RCP can be located anywhere.
A Telemetrics Device Server DS-4 is used for connecting the cameras to
the Ethernet. Up to four cameras can be connected to one Device Server
DS-4 (Figure 6).
Consult the documentation that accompanies the Telemetrics Device Server
DS-4 and the Canon BU 45 Weatherproof Camera for additional information
concerning locating and connecting these products.
Figure 6 Example of an Installation Using a Single Device Server DS-4
15