Operation
The Canon BU 45 Camera Control System allows an operator to control up to sixteen
Canon BU 45 cameras (plus peripheral devices such as lights, audio mixers, or
recording devices) from one or more local or remote stations.
Starting Up
Switching the Power On
The main power switch is located at the rear of the RCP (see Figure 11 on page 21).
1.
Place the main power switch in the ON position, then press the power button
at the bottom of the touch screen. The system initializes, and the RCP
Loading screen is momentarily displayed (Figure 23).
Figure 23
The main power switch can be left on, if desired. The screen saver
is displayed whenever the system is inactive for a specified period
of time. See page 26 for instructions to change the period of time
before the screen saver is displayed.
To cancel display of the screen saver, touch anywhere on the
screen.
RCP Loading
Screen
37