Typical Application - Algo 8301 Installation/Configuration Manual

Typical Application

The 8301 Paging Adapter & Scheduler is typically used to connect an
existing paging amplifier to a UC environment either as a SIP
extension or multicast endpoint.
The Line Output of the 8301 is connected directly to the dry audio
input on an amplifier with an input impedance between 600 Ohm and
10 kOhm.
For amplifiers connected directly to the dry page port of an existing
telephone system, the 8301 will provide a very similar interface
providing both dry page audio and dry contact closure to activate the
amplifier (if required).
For amplifiers connected to a FXS port or ATA through a "telephone
answering device" the 8301 will replace the answering device and
eliminate the need for a FXS port or ATA.
Document 90-00070
2017-08-30
Page 11
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8301 Paging Adapter & Scheduler (FW 1.5)
support@algosolutions.com
(604) 454-3792