STARTER MOTOR
Installation of Starter Motor
1. Reinstall the starter motor to the flywheel
housing.
2. Reinstall the starter mounting bolts
(Figure 11-36, (1)). Tighten the bolts to
specification. See Tightening Torques for
Standard Bolts and Nuts on page 4-46.
Figure 11-36
3. Reconnect the electrical wires to the magnetic
switch assembly (solenoid). Be sure to place
the cover over the battery positive (+) cable
connection.
4.
Reconnect the battery cables at the battery.
11-20
(1)
0002126
TNV DI Service Manual
Starter Motor