Yanmar 3TNV82A-B Service Manual page 136

Industrial
Hide thumbs Also See for 3TNV82A-B:
Table of Contents

Advertisement

ENGINE
CAUTION
• Only use the engine oil specified.
Other engine oils may affect warranty
coverage, cause internal engine
components to seize and / or shorten
engine life.
• Prevent dirt and debris from
contaminating the engine oil. Carefully
clean the oil cap / dipstick and the
surrounding area before you remove
the cap.
• NEVER mix different types of engine
oil. This may adversely affect the
lubricating properties of the engine oil.
• NEVER overfill. Overfilling may result
in white exhaust smoke, engine
overspeed or internal damage.
CAUTION
• Only use the engine coolant specified.
Other engine coolants may affect
warranty coverage, cause an internal
buildup of rust and scale and / or
shorten engine life.
• Prevent dirt and debris from
contaminating the engine coolant.
Carefully clean the radiator cap and
the surrounding area before you
remove the cap.
• NEVER mix different types of engine
coolants. This may adversely affect the
properties of the engine coolant.
CAUTION
Identify all parts and their location using
an appropriate method. It is important
that all parts are returned to the same
position during the reassembly process.
6-4
Any part which is found defective as a
result of inspection or any part whose
measured value does not satisfy the
standard or limit must be replaced.
Any part determined to not meet the
service standard or limit before the next
service, as determined from the state of
current rate of wear, should be replaced
even though the part currently meets the
service standard limit.
0000005en
Remove or install the high-pressure fuel
injection lines as an assembly whenever
possible. Disassembling the
high-pressure fuel injection lines from
the retainers or bending any of the fuel
lines will make it difficult to reinstall the
fuel lines.
Do not loosen or remove the four bolts
retaining the fuel injection pump drive
gear to the fuel injection pump hub. Do
not disassemble the fuel injection pump
drive gear from the hub. Correct fuel
injection timing will be very difficult or
impossible to achieve.
0000006en
0000080en
Before You Begin Servicing
CAUTION
CAUTION
CAUTION
CAUTION
TNV DI Service Manual
0000119en
0000120en
0000047en
0000031en

Advertisement

Table of Contents
loading

Table of Contents