Furuno FEA-2107-BB Installation Manual page 7

Multi-workstation configuration
In the multiple workstation configuration, there can be two workstations connected together
by a Local Area Network (LAN). In this configuration, one workstation is used as the "sensor
source" for navigation sensors and the other workstation(s) are using the sensor source
workstation to communicate with sensors, receiving and transmitting data from/to
workstation via the LAN. In the multi-workstation configuration (two fully redundant
navigation workstations), where navigation sensors are connected to two workstations, the
sensor source may be changed and still receive and transmit information from/to the system
and to/from navigation sensors. User-defined workstation is responsible for sensors.
ECDIS Monitor
MU-201CE (FEA-2107)
MU-190 (FEA-2107-D)
MU-231CE (FEA-2807)
100-230 VAC
MU-231 (FEA-2807-D)
DVI or RGB
CALCOMP
DRAWING -
BOARD III
DIGITIZER
100-230 VAC
ALARM OUTPUT
(ECDIS SYSTEM FAIL)
100-230 VAC
100-230 VAC
ALARM OUTPUT
(ECDIS SYSTEM FAIL)
Conning Monitor
MU-201CE (FEA-2107)
MU-190 (FEA-2107-D)
100-230 VAC
MU-231CE (FEA-2807)
MU-231 (FEA-2807-D)
DVI or RGB
HUB-
100
(WORKSTATION)
ECDIS PROCESSOR 100-230 VAC
EC1000C
RADAR OVERLAY PCB
Control Head
RCU-018
or
TB Control Unit
RCU-015FEA
Remote Control Unit
RCU-016
ECDIS Monitor
MU-201CE (FEA-2107)
MU-190 (FEA-2107-D)
MU-231CE (FEA-2807)
MU-231 (FEA-2807-D)
(WORKSTATION)
HUB-
100
ECDIS PROCESSOR
EC1000C
RADAR OVERLAY PCB
100-230 VAC
Control Unit
RCU-018
or
TB Control Unit
RCU-015FEA
Remote Control Unit
RCU-016
LAN-ADAPTER
EC-1010
Rectifier
PR-62
24 VDC
100/230 VAC
LAN-ADAPTER
EC-1010
Rectifier
PR-62
24 VDC
100/230 VAC
B-ADAPTER
EC-1020
Rectifier
PR-62
24 VDC
100/230 VAC
RADAR
SWITCH
RADAR 1 (VIDEO, HL, AZ)
RADAR 2 (VIDEO, HL, AZ)
PRINTER
(USB)
LAN ADAPTER
EC-1010
Rectifier
PR-62
24 VDC
100/230 VAC
LAN ADAPTER
EC-1010
Rectifier
PR-62
24 VDC
100/230 VAC
B ADAPTER
EC-1020
Rectifier
PR-62
100/230 VAC
24 VDC
RADAR 1 (VIDEO, HL, AZ)
RADAR
RADAR 2 (VIDEO, HL, AZ)
SWITCH
PRINTER
(USB)
v
ARPA RADARS
POSITION-FIXING EQUIPMENT
TRACK PILOT
LOG/DUAL AXIS LOG
AIS
GYRO COMPASS
POSITION EQUIPMENT
ENGINE CONTROL
ECHOSOUNDER
WIND SENSOR
WATER TEMP. METER
AMWSS (Alarm Monitoring
Watch Safety System)
GYRO COMPASS
(SYNCHRO, STEPPER)
LOG (200P/NM)
ANALOG INPUT (8 CHANNELS)
ANALOG OUTPUT (ECDIS, 8 CHANNEL)
ARPA RADARS
POSITION-FIXING EQUIPMENT
TRACK PILOT
LOG/DUAL AXIS LOG
AIS
GYRO COMPASS
POSITION EQUIPMENT
ENGINE CONTROL
ECHOSOUNDER
WIND SENSOR
WATER TEMP. METER
AMWSS (Alarm Monitoring
Watch Safety System)
GYRO COMPASS
(SYNCHRO, STEPPER)
LOG (200P/NM)
ANALOG INPUT (8 CHANNEL)
ANALOG OUTPUT (8 CHANNEL)
OPTION
EXTERNAL
DEVICE