Activation Of Cm-93/3 - Furuno FEA-2107-BB Installation Manual

3.6

Activation of CM-93/3

Before CM-93/3 charts can be used, you have to activate eToken (the dongle for system ID)
of CM-93/3 as follows:
1. Start ECDIS.
2. Select "C-Map Ed3 installation" from Menu -> Initial settings.
3. C-Map Installation dialog box appears. Press the Install button.
The shape of dialog box is different depending on the software version, 05.xx: portrait and
06.xx: landscape. This section shows dialog boxes for ver.05.xx as examples.
(ver.05.xx)
4. The eTInstall dialog box appears.
(ver.06.xx)
3. ADJUSTMENTS
3-83