Maintenance - Colortrac SmartLF Scan! User Instructions

MAINTENANCE
STEPS
Check the latest firmware level for SmartLF Scan! posted at
http://www.colortrac.com/support/software‐downloads/
Switch on SmartLF Scan! and check fitted firmware level
Obtain an empty USB flash drive of at least 4GB capacity.
It is important the drive contains no folder or files.
Using a Windows computer copy the contents of the firmware
upgrade zip file to the USB stick. There should be three files only
on the USB memory stick to perform the firmware upgrade on the
scanner. Do not copy the zip file onto the USB stick.
Insert the USB stick into scanner USB socket
From the upgrade firmware icon press OK. Upgrading takes approx.
20 seconds. If SmartLF Scan! does not restart automatically switch
the unit off for 3 seconds then switch it on again.
Now reset all settings and check the firmware has updated
.
DOCUMENT NO 88N001G
UPGRADING FIRMWARE
See p.26 for video
© 2016 Colortrac
22