Empty Key - Mitel 6873i User Manual

Expansion Module Keys
6. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
7. In the Type field, select Call History.
8. In the Label field, enter a label to display on the phone for the key (default is "Call History").
9. Click Save Settings.

EMPTY KEY

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do
this by setting the softkey to Empty. The keys are added in order (from key 1 to Key 30 [bottom]
or Key 48 [top]) after any hard-coded keys have been added. If a particular key is not defined,
it is ignored.
CONFIGURING AN EMPTY KEY USING THE MITEL WEB UI
MITEL WEB UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Empty.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Expansion Module Keys
5. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
6. In the Type field, select Empty.
7. Click Save Settings.
Configuring Softkeys
147