Lubricating With Grease - DURKOPP ADLER 512-211-01 Service Instructions Manual

Maintenance

13.2.2 Lubricating with grease

Allowing the machine to operate at peak efficiency requires that its moving
parts be lubricated sufficiently.
Lubrication points on the rear of the machine
Abb. 38: Lubrication (1)
(1) - Cam disk
(2) - Fleece
1. Apply an adequate amount of grease to the fleece (2) to lubricate the
2. Apply a small amount of grease to the joints (3) to ensure they remain
Abb. 39: Lubrication (2)
(4) - Roller
(5) - Guide groove
3. Apply a small amount of grease to the inner guide groove (5) and the
4. Apply a small amount of grease to the joints (6).
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
①
②
outer side of the cam disk (1).
flexible.
④
⑤
roller (4) from the outside.
③
(3) - Joints
⑥
(6) - Joints
67