Table of Contents
Advertisement
installation
|
38
OPTIONAL BRICK PANELS
1) Remove Faceplate if installed.
2) Undo the bottom 2 door latches and open and remove glass door.
Remove logs.
Note: The logs must not be in the unit.
3) Insert the back brick panel first by carefully slipping it between the
back wall of the firebox and the rear log bracket.
4) Put the side panels in next. Slide them in from the front and push
them flat up against the wall. Be very careful not to scratch them on
the firebox hardware.
38 |
P36E-10 Zero Clearance Direct Vent Gas Fireplace
5) Install the 2 brick retaining clips, one on each side.
Hide quick links:
Advertisement
Table of Contents
