Standard Flush Door - Regency P36E-NG10 Owners & Installation Manual

installation
|
42

STANDARD FLUSH DOOR

Note: Flush door must be installed prior to the installation of the
Vignette faceplate.
The standard flush door comes with a black frame. To install the frame,
simply hook the top door flange onto the top of the unit and swing the
door towards the unit, see Diagram 1.
42 |
P36E-10 Zero Clearance Direct Vent Gas Fireplace
Diagram 1
Be careful that the glass gasket does not roll up; there must be a gap
between the gasket and the door lip to ensure that the door sits securely
on the unit, see Diagram 2.
Use the hook to pull the spring out until you can put the hook into the
slot on the bottom door bracket. Repeat for 2nd spring. See Diagram 3.
To remove the flush door, reverse the above steps.
Diagram 2
Diagram 3