Table of Contents
Advertisement
Left side
Item
(1)
(2)
(3)
(4)
(5)
(6)
8
Chapter 2 External component identification
Component
Power button
Security cable slot
Vent
USB 2.0 port
Memory card reader
Volume button
Description
●
When the tablet is off, press the button to turn on the tablet.
●
When the tablet is on, press the button briefly to
initiate Sleep.
●
When the tablet is in the Sleep state, press the button briefly
to exit Sleep.
●
When the tablet is in Hibernation, press the button briefly to
exit Hibernation.
CAUTION:
Pressing and holding down the power button will
result in the loss of unsaved information.
If the tablet has stopped responding and Windows shutdown
procedures are ineffective, press and hold the power button down
for at least 5 seconds to turn off the tablet.
To learn more about your power settings, see your power options.
From the Start screen, type power, select Power and sleep
settings, and then select Power and sleep from the list
of applications.
Attaches an optional security cable to the computer.
NOTE:
The security cable is designed to act as a deterrent, but it
may not prevent the computer from being mishandled or stolen.
Enable airflow to cool internal components.
NOTE:
The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.
Reads optional memory cards that enable you to store, manage,
share or access information.
To insert a card:
▲
Hold the card label-side up, with connectors facing the slot,
insert the card into the slot, and then push in on the card
until it is firmly seated.
To remove a card:
▲
Press in on the card it until it pops out.
Controls speaker volume on the tablet.
Advertisement
Table of Contents
