Installing The Vc5090 On A Desktop - Motorola VC5090 Quick Reference Manual

18
Heat shrink tubing.
6.
Connect the red wire to the vehicle's positive power source. Connect
7.
the black wire to the vehicle's negative power source.
The vehicle computer contains a Ignition Sense feature that
NOTE
detects when the ignition switch is turned off. This allows the
device to draw power for a preset amount of time to allow
proper shutdown of applications then removes power so that it
would not drain the vehicle's battery.
Connect the yellow wire to the vehicle's ignition switch. If you do not
8.
plan on using the Ignition Sense feature, connect the yellow wire to
the vehicle's positive power source.
Ensure the wiring connections created are sufficiently insulated from
9.
each other.
Re-connect the vehicle battery.
10.
Insert the power cable connector into the vehicle computer's Power
11.
port. Align the keyway on the power connector with the notch on the
vehicle computer's power port.

Installing the VC5090 on a Desktop

To mount the vehicle computer on a desktop:
CAUTION
Install the mounting bracket to the desktop using four cap screws,
1.
eight washers and four nuts.
The VC5090 ships with four cap screws (3/8" - 16 - 2") for
NOTE
securing the mounting bracket. If the supplied cap screws
are not long enough, use 3/8" - 16 - X stainless steel cap
screws where X represents the length in inches of the
required cap screws.
If mounting to a thin surface such as drywall or plywood, a
reinforcing plate is required.
VC5090 Vehicle Computer