Preface - Axxess ASWC-1 Installation Manual

What you need to know before you begin
1) Know the correct year, make, and model of your vehicle.
2) Ensure the steering wheel controls work before removing the factory
radio, and know what the Volume Up button is. The Volume Up
button is used for programming, so knowing this before removing
the radio is crucial.
Note: Steering wheel controls must be the ones that came with the
vehicle when purchased. We do not support custom work, i.e. adding
a new steering wheel with added/new buttons.
3) Go to the Axxess website (axxessinterfaces.com) and click on the
link entitled "ASWC-1 Vehicle Instructions", which is located on the
right side of the screen in the middle. Once you put your vehicle
information in, click the "Submit" button. This will take you to
another page, where you will then click on the link under the word
"Documents". This will provide the vehicle specific instructions
for your vehicle. Print this document so you have it with you in the
vehicle during the install as it is the best, and most recent
source of information.
4) Be sure that the radio you are installing is compatible with the
ASWC-1. Additionally, refer to the Radio Legend (p. 13) and your
radio's owners manual.
5) Update the ASWC-1 to the latest software. Note: To update go to
axxessinterfaces.com and download the WebXXpress program.
Attention: Even though we have done extensive research and testing
to verify that the steering wheel control wires we list are correct. It is
your responsibility to verify the steering wheel control wires we list are
correct with a multimeter. If you find an error, please notify our Axxess
Tech department at 1-800-253-TECH. Please be in the vehicle, parked,
along with access to the interface and vehicle wiring when you call.

Preface

3