Programming Automatic Switch On - Winterhalter UC series Operating Instructions Manual

PIN Menu

14.2 Programming automatic switch on

Here you can:
 programme, when the machine is to fill and heat up automatically.
The automatic switching on/off can be set either per day or for a special date. If the inputs overlap, a specific
date always takes precedence over the weekly programme.
IMPORTANT The following requirements must be met at the time of the automatic switch on:

The hood is closed.

The on-site mains disconnector is switched on.

The water stop cock is open.
Programming automatic switch on
 Press the button:
Setting the weekday
 Activate functions.
 Repeat as necessary
for the other weekdays.
Setting a special date
 Activate functions.
26
 Select weekday.
 Save.
 Enter the date and time.
INFO
 Activate weekday.
 Save.
The date and time of the next automatic activation are
displayed when the machine is switched on. However,
the machine can be used before this point of time.
 Enter the time.