Programming Wash Parameters - Winterhalter 4P GDR Operating Manual

Programming wash parameters

To enter the programming mode, first turn the machine on (1). Then keep buttons (10)
and (13) pressed simultaneously for more then 3 seconds.
Once in the programming mode, display (7) will indicate the parameter number and
display 8 indicates the value.
To change the value of the selected parameter, use button (11) to decrease the value
and button (12) to increase the value. Once you have reached the desired value, press
button (9) to store the value.
To browse to another parameter, use button (10) to decrease the parameter number or
button (13) to increase the parameter menu.
To exit the programming mode, turn the machine off (1).
See also table 'Parameter menu' on page 8 for details on the parameters.
8 Version 1.0