Winterhalter UC series Operating Instructions Manual page 17

10.1.2 Self-cleaning programme at the end of the working day
The machine is equipped with a self-cleaning programme that assists you when you are cleaning the inside
of the machine. After the first programme step (figure 4), the self-cleaning programme is interrupted so that
you can remove the filter cylinder and the strainer and clean them (figures 5-15). If you do not follow these
steps, the self-cleaning programme will continue automatically after 30 seconds.
 Proceed in accordance with Figures 1 to 30.
If the lack of salt
pictogram appears:
Follow images 8a-
8c (see also sec-
tion ‎ 7 ‎ 7 .3).
Terminating the self-cleaning programme:
 Press this button.
 The background of the button becomes blue.
 The machine is filled again.
green -> blue
Maintenance and care
15