Radio Mode; Select Radio As Playing Source; Select One Radio Band; Tune - Caliber RDD 885BTI User Manual

Radio mode

Select radio as playing source

Open the SOURCE MENU and then touch
[RADIO].

Select one radio band

Press the [BAND] key on the remote control
or touch the [ ] icon on the user interface
to select one radio band among FM1, FM2,
FM3, AM1 and AM2.

Tune

Auto tuning
Press the [ ] / [
control or touch the [
user interface to seek a higher / lower station.
To stop searching, repeat the operation above
or press other keys having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] / [
or touch the [ ] / [
interface to tune in a higher / lower station.
Touch the numeric keypad icon(
touch the numeric buttons to input the radio
station frequency numbers.

Preset station

The unit has 5 bands, such as FM1, FM2,
FM3, AM1, AM2, and each band can store 6
stations; hence the unit can store 30 stations
in total.
] key on the remote
] / [ ] icon on the
] key on remote control
] icon on the user
) and then
Manual store
1. Tune to a station.
2. Touch [ ].
3. Touch one of the channels P1 to P6 to save
the selected band.
Auto store (AS)
To select six strong stations and store them in
the current band:
1. Select a band (if needed).
2. Touch [AS] on the on-screen controls to
activate the Auto Store function.
The new stations replace stations already
stored in that band. If you have already
set the preset memories to your favorite
stations, activating the Auto-Store feature
will erase those stations and enter the new
strong stations. This feature is most useful
when travelling in an area where you are
not familiar with the local stations.
Preview scan (SCAN)
To scan the AM or FM band for a preview
of available stations in your particular area,
touch [ ] icon. The scan function will play
the first 5 seconds of each station.
When a desired station is reached, touch
[ ] icon again. Play of the selected station
will continue and the preview scan will stop.
Recalling a station
1. Select a band (if needed).
2. Touch an on-screen preset button to select
the corresponding stored station.
Local radio station seeking (LOC)
When the Local function is on, only radio
stations with a strong local radio signal are
played. To activate the Local function in the
AM/FM tuner mode, touch [MORE] on the
screen. The Options tab is revealed. Touch
[ ] icon and choose the Radio Local or
Distance. When the Local function is active,
the LOC indicator at the top of the screen
is illuminated. When the Distant function
is active, the DX indicator at the top of the
screen is illuminated.

EQ Selection

Touch the [
setup.
EN - 6
] icon and enter the EQ