Table of Contents
Advertisement
RCD 272BTi
manual
RADIO OPERATIONS
Select tuner as playing source
Press [SRC] button once or more to enter
RADIO mode.
Selecting the radio band
Press the [BAND /
] button on the panel to
select one radio band among FM1, FM2, FM3,
AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
] or [
] button on the panel to
tune in a higher / lower station.
Auto tuning
Press and hold the [
] or [
seek a higher / lower station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press the
[PS/AS] button again to continue receiving
that station.
Note:
Be careful not to press and hold the [PS/
AS] button for 1 second or longer, otherwise
the auto store function will begin and the unit
starts storing stations.
Auto store
Only stations with sufficient signal strength will
be detected and stored in the memory.
Press and hold the [PS/AS] button (1 sec.) to
start automatic station search.
To stop auto store, press other buttons having
radio functions.
] button to
Notes:
1. After auto store, the previous stored stations
will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. Each bands can store 6
stations.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6 to
store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be
received.
To select LOCAL function, press and hold the
[ DISP ] button on the front panel, then press
[
] button repeatedly until LO or DX isplays
on the screen, and rotate the [vOLUmE] knob
to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is ON.
Display
First row: When receive the PS information of
RDS, the PS information will display on the
screen. If there are no PS information, the
band and frequency will display.
Second row: Press [DISP] button repeatedly
to switch among band, frequency, PTY, Radio
Text and clock.
5
Advertisement
Table of Contents
