Table of Contents
Advertisement
Note:
The selected information is displayed
for 5 seconds, then the radio goes back to
the first display mode after 5 seconds.
Clock display and adjustment
- To view the current time
Press the
DISP
button, the current time will
be shown on the LCD display for 5 seconds
and then revert to the previous display
mode.
- To adjust the time:
Press and hold the
hour blinks, then rotate the volume knob to
adjust the hour; Then press the
briefly, the minute will blink, and rotate the
volume knob to adjust minute.
ESP Function
This CD/MP3 car radio has the electronic
shockproof feature.So that if the unit skips
due to rough road conditions, the playback
of the disc will be uninterrupted.
Anti-theft LED Indicator
Designed as a theft deterrent, the red LED
will flash when the unit is turned off
and face plate removed.
:
DISP
button until the
DISP
Radio operations
To select a radio band
In radio mode, press the
repeatedly to select a radio broadcasting
band you would like to hear. The 3 FM
bands will be changed cyclically through
the tuning bands: ->FM 1-> FM 2 -> FM 3 ->.
Auto/ Manual tuning
- Automatic search mode:
Briefly press the
search will start. It will search upward or
button
downward for the strong signal radio station
within the current band. In auto tuning,
press the
Pressing and holding the
about 2 seconds until "MANUAL" appears
on LCD display, it will change into manual
search mode.
- Manual search mode:
Press the
repeatedly to manually search upward or
downward step by step for the desired radio
station within the current band.
In manual search process, if the both
buttons haven't been pressed within 5
seconds, it will change into automatic
search mode automatically, "AUTO" will be
visible on the LCD display.
To store / recall a preset radio stations
You can store up to a total of 18 FM radio
stations in the memory, manually or
automatically.
- To store a station:
- Select a band (if needed)
- Select a station by
- Press and hold a preset button ( - )
which you want to store the station for at
least 2 seconds, the current station will
be saved into the relevant preset memory
bank. When a RDS station is being
stored, the relevant PI, PS, AF list are
stored.
- To recall a station:
- Select a band (if needed).
- Press a preset button (1-6) briefly to
recall the stored station. In case of RDS
mode, the strongest AF is selected after
AF searching.
Auto store / Preset scan
- Preset scan:
BAND
:
9
or
button, the auto
:
9
or
button to stop tuning.
:
:
9
or
button short and
:
9
or
button
9
or
button for
button
.
1 6
Hide quick links:
Advertisement
Table of Contents
