Audio; Hardware; Rds - Caliber RDD 885BTI User Manual

Setup
● Load Factory
Select "Reset" to restore the factory default
settings for the Rating system only.

Audio

● Loudness
Select low frequency boost only or high
and low frequency boost.
● Subwoofer
Turns the subwoofer output on or off.
● Sub Filter
Select a crossover frequency to set a cut-
off frequency for the subwoofer's LPF (low-
pass filter).
● Bass Q
Adjust the Q / Bandwidth of the Bass
response of the selected BCF (Bass
Center Frequency).
● Mid Q
Adjust the Q / Bandwidth of the Midrange
response of the selected MCF (Midrange
Center Frequency).

Hardware

● Key Color
Choose the key backlight color Red or Blue.
● Camera In
Normal: Actual scenes shot by the camera
display on the TFT monitor while reverse
driving (just like what you are looking).
Mirror: The mirror images of actual scenes
display on the TFT monitor while
reverse driving (just like looking from the
rearview mirror).
● Video input
NTSC: Set the color system of the TFT
screen to NTSC.
PAL: Set the color system of the TFT
screen to PAL.
AUTO: Set the color system of the TFT
screen automatically by the unit according
to the input video formats.

RDS

● RDS
Turn On/Off the RDS feature.
● CT
System time is synchronized with current
broadcast station time (Clock Time).
Setting this feature to On will automatically
set your system clock.
● TA VOL
You can adjust TA volume from 0 to 7.
EN - 15