Playback Insert A Disc; Eject The Disc; Touch Screen Controls; Using Usb Device - Caliber RDD 885BTI User Manual

Table of Contents

Advertisement

Playback
Insert a disc
Upon inserting a disc, the unit will switch to
[DISP] mode automatically.
Notes:
1. Please confirm whether there is a disc in
the unit before you insert another one.
2. Some recorded discs, such as CD-R, CD-
RW, DVD-R, DVD+R, DVD-RW, DVD+RW
cannot be played back because of different
recording status. Otherwise, the discs
without being closed could not be played
back.
3. About the cautions of disc using, please
refer to the appendix.
4. Don't pledge to be compatible with all disc.

Eject the disc

Press the [
] key on the front panel or
remote control to eject the disc.

Touch screen controls

The touch key areas for DVD playback are
outlined below:
A - Open SOURCE MENU
B - Display playback information
C - Display onscreen control menu

Using USB device

1. Connect your USB device to the extension
box with USB / SD / Audio Aux-in.
2. To remove the USB device, you should first
select another source, in order to avoid
damaging the USB device.
Notes:
1. If there are audio files supported in the
USB stick, the system will enter the audio
files menu automatically.
If there are no audio files, but there are
video files supported in the USB stick,
the system will enter the video files menu
automatically.
If there are no audio or video files, but
there are picture files supported in the USB
stick, the system will enter the picture files
menu automatically.
If there no above audio/video/picture files
supported in the USB stick, the screen will
display: There are no audio/video/picture
files supported.
2. N o t a l l k i n d s o f U S B d e v i c e s a r e
compatible with the unit.

Using SD/MMC card

1. Insert the SD/MMC card into the SD/
MMC card slot on the extension box
with USB / SD / Audio Aux-in. Play starts
automatically.
2. To remove the card, you should first select
another source, in order to avoid damaging
the card.
USB
SD
Aux in

Play

Once a disc, or a USB device is inserted, play
starts automatically.

Pause

When play the audio/vedio file, press the
[
] key on the remote control or open the
on-screen control icons menu and then touch
the [
] icon, press the [
continue to play.

Stop

For audio files or video files, press the [■] key
on the remote control or open the on-screen
control icons menu and then touch the [■]
icon to stop. Press the [
the pausing point.
Touch the [■] icon again to stop entirely, and
press the [■] key on the remote control. Press
the [
] to playback from the top file.

Fast rewind/Fast forward

For CD/MP3/WMA
Press the [
EN - 7
] again and
] to resume from
] key on the remote control or

Advertisement

Table of Contents
loading

Table of Contents