Adjust sound
Adjust volume
To adjust volume, rotate the volume knob on
the host car audio.
Mute
When playback, press the VOLUME knob
on the panel or press the [MUTE] key on the
remote control, the sound is cut off.
To resume sound, press the button again.
Select preset equalizer
You can select preset equalizer:
[User]
[Rock]
[Latin]
[Rave]
1. Touch [EQ] on the screen.
The current equalizer setting is displayed.
2. Touch [ + ] or [ - ] to select an EQ.
3. Touch [ + ] or [ - ] to adjust below settings:
∙ [Bass] bass range: -14 to +14
∙ [Mid] middle range: -14 to +14
∙ [Treb] treble range: -14 to +14
∙ [Mcf] low pass filter range: 60, 80, 100, 200
∙ [Bcf] middle pass filter range: 0.5k, 1k,
∙ [Tcf] high pass filter rang: 10k, 12.5k,
4. Touch [
] on the screen to exit.
[Hip Hop]
[Dance]
[Urban]
[Acoustic]
1.5k, 2.5k
15k, 17.5k
Adjust rader/balance
You can also adjust the front and rear
speaker balance, the left and right speaker
balance,and subwoofer settings.
1. Touch [EQ] on the screen.
2. Touch [BAL-FAD].
Below options are displayed:
3. Touch [ + ] or [ - ] to select subwoofer volume.
∙ [Sub] subwoofer volume: -14 to +14.
4. Touch [
fader/balance value.
∙ [Fade] fader range:
-16 to +16 (F=front range, R=rear range)
∙ [Balance] balance range:
-16 to +16 (L=left range, R=rear range)
5. Touch [
] on the screen to exit.
EN - 16
], [
] or [
], [
] to adjust