Endress+Hauser Levelflex FMP53 Brief Operating Instructions page 46

Commissioning (block-based operation)
11.7.1 Groups of events
The diagnostic messages are classified into 16 groups according to the source and severity of
the respective event. A default diagnostic category is allocated to each group. Each group is
also represented by one bit of the allocation parameters.
Severity of the event Default diagnostic category
Highest severity Failure (F)
1) This event can be removed from the group in order to define its behavior individually; see section "Configurable
area".
Severity of the event Default diagnostic category
High severity Function check (C)
46
Levelflex FMP53 FOUNDATION Fieldbus
Source of the Bit
event
Sensor 31
Electronics 30
Configuration 29
Process 28
Source of the Bit
event
Sensor 27
Electronics 26
Events within the group
• F003: Broken probe detected
• F046: Build-up detected
• F083: Memory content
• F104: HF cable
• F105: HF cable
• F106: Sensor
• F242: Software incompatible
• F252: Modules incompatible
• F261: Electronic modules
• F262: Module connecting
• F270: Main electronic failure
• F271: Main electronic failure
• F272: Main electronic failure
• F273: Main electronic failure
• F275: I/O-Modul failure
• F276: I/O module failure
• F282: Datenspeicher
• F283: Electronic memory
• F311: Memory content
• F410: Data transfer
• F411: Up-/download
• F435: Linearization
• F437: Configuration
incompatible
• F803: Current loop 1
• F825: Current loop 1
• F936: EMC interference
1)
• F941: Echo lost
• F970: Linearization
Events within the group
not used in Levelflex
not used in Levelflex
Endress+Hauser