Compatible Components; Sound Protection; Technical Data - Viega Eco Plus Instructions For Use Manual

Lowering the washbasin
Lifting the washbasin
2.2.3

Compatible components

2.2.4

Sound protection

2.2.5

Technical data

Viega Eco Plus washbasin element,
individually height-adjustable
CAUTION! Risk of crushing – the cover plate shifts in parallel
with the wall surface during the height adjustment. Due to this,
there is the risk of crushing in the areas above and below the
cover plate.
Keep hands away from the dangerous areas.
When the actuating button is pressed and there is the light load of a
washbasin, the ceramic is lowered by maximum of 20 cm.
When the actuating button is pressed and there is no load, the wash-
basin is raised by a maximum of 20 cm by the gas pressure spring. If
necessary, apply some manual help in the case of heavy washbasin
ceramics.
The element is suitable for washbasin ceramics with a fixing interval of
280 mm. The maximum washbasin width is 700 mm.
The cover plate 8064.22 is required for the detailed installation.
The washbasin element fulfils the requirements in acc. with DIN 4109 as
well as the increased requirements in acc. with
DIN 4109 (supplementary sheet 2) and the requirements in acc. with
VDI 4100 SSt I-SSt III.
The product has the following technical data:
individual adjusting range of the
washbasin height
Fixing interval of the washbasin
ceramic
max. washbasin width
Wall construction
(incl. wall tile)
Product information
200 mm
280 mm
700 mm
max. 45 mm
10 from 37