Intermec 700 Series User Manual page 129

700 Series Color Mobile Computer User's Manual
2 Tap the General tab, then enter a network name. If the network was
detected, the network name is automatically entered and cannot be
changed.
From Connects to, select to what your network is to connect: "Work"
or "The Internet."
To connect to an ad-hoc connection, select This is a
device-to-computer (ad-hoc) connection.
3 Tap the Authentication tab, then do the following:
S To use data encryption, tap Data encryption (WEP Enabled).
S To use Shared Key authentication, tap Network Authentication
(Shared mode). Be sure to have a network key.
S To automatically use a network key, tap The Key is provided for me
automatically. Otherwise, enter the network key.
S For increased security, select Enable network access using IEEE
802.1X. Then, select the appropriate EAP type.
Chapter 2 — Windows Mobile 2003
109