Chapter
4
—
Network Support
172
7 Press and hold the new connection for a pop-up menu, then tap
Connect to initiate the connection.
8 Wait about ten seconds for the Network Log On screen, then tap OK.
Note: You do not need to enter any information within the Network Log
On screen.
Use either the onscreen keyboard, or press the keys to type any of the AT
commands provided. Press or tap Enter to send each command. The re-
sults of each command sent will print onscreen. Note that each "AT" com-
mand must start with the "at" characters.
S To see what you typed onscreen, type "ate1" to initiate the AT Echo
command, then press Enter.
700 Series Color Mobile Computer User's Manual