700 Series Color Mobile Computer User's Manual - Intermec 700 Series User Manual

700 Series Color Mobile Computer User's Manual

Testing the AT Commands
These commands can be sent to either WAN radio by setting up a dial-up
networking connection to COM4. Do the following to initiate this con-
nection and test these commands to your radio:
1 From the 700 Series Computer, select Start > Settings > the
Connections tab > Connections. Under My ISP, tap Add a new
modem connection.
2 Enter a name for the connection, select "WANA on COM4" from the
Select a modem drop-down list, then tap Next to continue.
Chapter 4 — Network Support
169