700 Series Color Mobile Computer User's Manual - Intermec 700 Series User Manual

Activation The process of programming the radio with the lock code (MSL) and phone number (MIN) to
allow it to communicate on the provider's network. Once activation is complete you can make
voice calls (if enabled by the carrier) with the mobile computer.
Data Provisioning The process of activating the ability for the CDMA radio to establish data connections, such as
connecting to the Internet. The CDMA radio makes data connection only after it is activated
and data provisioned.
NID (Network ID) A numeric value programmed into the CDMA radio at the factory or during the activation
process. Your carrier may or may not use this value, but your carrier may provide this for ac-
tivation purposes.
SID (System ID) A numeric value programmed into the CDMA radio at the factory or during the activation
process. This number is used by your carrier to determine if the radio belongs to its CDMA
network. Your carrier may provide this number for activation purposes.

700 Series Color Mobile Computer User's Manual

CDMA Radio Set Up
Note: Set up and provision information is also available in the 700 Color
CDMA Radio Setup Quick Start Guide P/N: 962-054-063.
This tells you how to set up your CDMA radio in your 760 Computer.
Below are terms to familiarize you with CDMA radio technology:
Note: Descriptions in this chapter are for Sprint PCS, Bell Mobility, Te-
lus, and Verizon Networks versions of the SB555 Watcher program. Oth-
er carriers may be added pending regulatory and carrier approval.
Copying CDMA Radio Module CAB Files from Intermec Web Site
Copy CAB files from the Intermec web site at http://www.intermec.com
onto your desktop. Note that this is subject to change.
1 Select Service & Support > Developers Support from the blue naviga-
tion bar on the Intermec home page.
2 Select 700 Color Support from the Developers Support navigation co-
lumn on the left side of the screen.
3 Select Downloads from beneath the 700 Color Support selection in the
Developers Support navigation column on the left side of the screen.
4 Scroll down to the "Sierra Wireless 'Watcher' Application" paragraph
(beneath the Tools category), download any of the CAB files shown,
then choose your carrier CAB files.
Intermec recommends two methods with which to load these CAB files
onto your 760 Computer: via the Microsoft ActiveSync application (next
paragraph) or via a CompactFlash or Secure Digital storage card (next
page). See Chapter 3, "Installing Applications," for more information about
these methods.
Chapter 4 — Network Support
137