700 Series Color Mobile Computer User's Manual - Intermec 700 Series User Manual

Chapter 4 — Network Support
Properties
Select a COM Port from the Choose COM Port box to register for this
device, then check Enable Wireless Printing to complete the COM port
registration. To change your COM port selection, clear (uncheck) the En-
able Wireless Printing box, select a new COM port, then check Enable
Wireless Printing again. COM ports that already are in use are grayed out.
When you enable Wireless Printing, a status message is shown near the
bottom of the screen to confirm your action. To print a test page to your
printer, tap Print Test Page.
Tap ok to return to the Wireless Printing page.

700 Series Color Mobile Computer User's Manual

175