ITS Telecom Pancode VoIP Installation And Programming Manual page 22

Parameter
Access Codes 1 – 10
Peer IP Address
Peer Mode
No answer Time Out
Off Hook Time Out
Pancode VoIP/Pantel VoIP Access Control Door Phones
Description
Access Door Opening Codes fields – contain door opening codes. Each
field can contain a code of up to 8 digits, which opens the door lock.
Legal entries: 0-9 digits only. An access door-opening code cannot
begin with digits that are used as direct call prefix number.
Specify the target Peer device IP address when Peer mode is activated.
Used mostly for functionality testing purposes. Specify the following type
of operation: Visitor dials any free up to 3 digits number and IP Door panel
try to establish SIP connection with the target Peer device, where dialed
digits used as fourth quarter of the IP address. For example:
Peer IP Address is 192.168.21.XXX, where last XXX digits are
insignificant.
Visitor dialed 151.
Door panel started to establish connection with the IP address
192.168.21.151
Time interval, when a call will be forwarded to the another destination
specified in the Call Button Dial no Answer (Forward No Answer)
parameter when destination dialed by visitor did not answer.
This parameter is relevant if the Auto Answer mode is disabled. Specify a
maximum time interval in seconds, when the IP Door Panel can be in the
No Answer mode during incoming call before rejecting the call.
Installation and Programming Manual
20