Table of Contents
Advertisement
Design
6
Surface &
Reference
Floor (D)
Rear wall (F)
Door wall (A)
Door in wall (A) ISN-SM-30 - 11
Table 6-4: Overview of complete vault installation
6.4
Night Deposit Box and ATM Applications
When planning the detector layout for night deposit boxes or ATMs it is important to protect the
most likely points of attack:
a) The body of the ATM/night deposit box near to the dispenser or opening.
b) The door for accessing the interior of the ATM or night deposit box.
To provide the highest security level consider the type of detector to use and the accessories that
will complement the design & assist with the detection properties of the detector.
6.4.1
Night deposit boxes
Figure 6-18: Night deposit box shows a typical example of a night deposit box application, with the
grey area being the public access side and the white area being the secure side. The wall provides
a physical divide between the two areas.
Figure 6-18: Night deposit box
etectors should be mounted close to the the potential attack points, but consideration should be
D
given to the following environmental factors that can generate noise and vibration:
•
Opening and closing the door
•
Depositing of cash in the depository drawer
•
Drop of deposits to the floor of the protected area
42
Bosch Security Systems
Detector-Reference Detector Setting
ISN-SM-90 – 7
ISN-SM-90 – 8
ISN-SM-90 – 9
ISN-SM-90 – 10
Not all of the detection radius options are available via the DIP switches. SensTool must
be used to access of a full set of options.
Seismic Detectors Application Guide
Accessory for
Mounting
5m concrete
GMXB0
5m concrete
GMXB0
5m concrete
GMXW0
5m concrete
GMXW0
2m steel
GMXP3
Accessory for
Testing
GMXS1
GMXS1
GMXS1
GMXS1
GMXS1
I-200153-1
04.2016
Advertisement
Table of Contents
